<VV> PG upshift flare - vac modulator?

[harryyarnell]

The band adjustment is sticking out of the top of the PG.
Can't remember if the powertrain needs to be lowered slightly for access,
but I don't think so (the mind is slowly going...).

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Bryan Blackwell
Sent: Friday, March 22, 2013 10:29 AM
To: don jennings
Cc: Virtual Vairs
Subject: Re: <VV> PG upshift flare - vac modulator?

Thanks Don - follow up question - can the adjustment be done in the car?
The shop manual says to lower the transmission, but they don't say how much
or what else might need disconnecting.

--Bryan

On Mar 22, 2013, at 6:36 AM, don jennings wrote:

> I have had the same problem with several cars. I have found that the 
> band needs to be adjusted. With the bad modulator the trans had high 
> line pressure and made the shift firmer so you never noticed the 
> flare. The last one I did I only backed the band adjust out 3 turns 
> instead of 4 like the shop manual says to do.

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________