<VV> Never saw This Before

Brian bmoneill at juno.com
Mon Oct 7 09:26:02 EDT 2013


Yes, I is a correct 140 block. I fully intend to check the clearances using full flanged bearings.  Thanks for the input.

---------- Original Message ----------
From: Mark Durham <62vair at gmail.com>
To: Brian <bmoneill at juno.com>
Cc: "fastvair at yahoogroups.com" <fastvair at yahoogroups.com>, Virtual Vairs <VirtualVairs at corvair.org>
Subject: Re: <VV> Never saw This Before
Date: Sun, 6 Oct 2013 17:06:25 -0700

Brian, is the block correct for the 140? I pulled a set of main bearings out of my 62 102 several years ago that was flanged on one side and not the other. GM put some blocks together that way from the factory back in 62, and I suppose those bearings could fit in any block if found on the aftermarket. It did not seem to make a difference on operation, those mains had 47 years and 69K miles on them and they we still new tolerances at all four journals and on run out.  I was a bit nervous wondering why they did this when I installed a set with full flanges on both sides, because was there a problem with the case? As it happens, no,my clearances were within factory limits on runout there for both halves. Mark Durham62 Monza 900 CoupeHauser Idaho  

On Sun, Oct 6, 2013 at 3:28 PM, Brian <bmoneill at juno.com> wrote:
I'm disassembling a 65 140 engine for a new club member.  He recently bought this CORSA convertible but it ran very poorly.  Inspection showed a dropped valve seat on #5. That was only the beginning of the issues.  The flywheel retaining ring was missing.  The pilot bushing was so worn, I thought it wasn't there.  Tons of blue and red silicone on every conceivable bolt. The real surprise came when I spilt the case.  In addition to a toasted cam, I found that only one half of the case had the correct flanged bearing.  The other half had a regular main bearing shell.  I can't identify the bearing.  No size markings, i.e. 'STD, .010, etc. Also can't identity the manufacturer.  The bearing are stamped "DAZ".
Am I missing something here?  Has anyone ever seen this before?
____________________________________________________________
Do THIS before eating carbs &#40;every time&#41;
1 EASY tip to increase fat-burning, lower blood sugar & decrease fat storage
http://thirdpartyoffers.juno.com/TGL3131/5251e46149f5e64615007st04vuc
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________


-- 
Mark DurhamHauser, Idaho62 Monza coupe Red/Red 4 speed
____________________________________________________________
One Weird Trick
Could add $1,000s to Your Social Security Checks! See if you Qualify&#8230
http://thirdpartyoffers.juno.com/TGL3131/5252b6d29cae36d17d97st03vuc


More information about the VirtualVairs mailing list