<VV> Advice needed: CHEAP oil drip pans

[BBRT]

Hvy cardboard topped by old cookie sheets...
----- Original Message ----- 
From: <Taruffi57 at aol.com>
To: <virtualvairs at corvair.org>
Sent: Wednesday, September 04, 2013 2:00 PM
Subject: <VV> Advice needed: CHEAP oil drip pans


> Since my new garage floor looks so purty.....I would rather that some of 
> my
> "treasures" not foul it up with their droppings. (NOT my Corvairs).    The
> '62 Pontiac is the worst offender. (it rejects ALL fluids put into it)
>
> Floor is epoxy in the lift area, and 3 coats Sherwin-Williams concrete
> paint - topped with a sealer on the other 80%.  Looking for a cheap way to
> slip something under cars as needed.  Something that will not bleed 
> through  to
> the floor.  I tried 30 lb. roofing felt and oil went straight through  it.
> Same for roofing shingles.  Hey.  I had all that lying  around anyway.
> What would be nice is to have about 3 oil catchers that I  could just use 
> as
> needed, until I can deal with the offenders.
>
> All advice considered and appreciated.  Remember, this must pass  the
> Corvairisti mantra.  We are  CHEAP.
>
> Joe Dunlap
> Cen. Florida
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.3392 / Virus Database: 3222/6638 - Release Date: 09/04/13
>