<VV> Oil blowing out of dipstick tube

[MarK Durham]

If it just started doing this, is the oil level too high? Baring that,
excessive blow by from worn rings, a broken piston, etc.  Mark Durham
Hauser Idaho
On Mar 31, 2014 3:37 PM, "Matt Nall" <patiomatt at aol.com> wrote:

>
>
>
> Can anyone tell me why? oil would blow out of the dipstick tube when there
> is a
> constant vacuum being pulled on the crankcase from the equalizer tube.
> Thanks
>
> Sent from my iPad
>
> =============================================================
>
>
> Your engine  case top cover / breather is plugged..
>
>
>
>
>   Also the "factory FIX"  for this is to drill a small hole in the
> Dipstick tube just below thecase,  or just break it off.
>
>
> Matt Nall
> Charleston, Oregon
> http://tinyurl.com/The-Corvair-Patio
>
> http://tinyurl.com/Matts-Tech-Pages
>
>
>
>
>
>
>
>
>
>
>
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>