<VV> 64 Suspension on a 62

jwcorvair at aol.com jwcorvair at aol.com
Tue Dec 2 22:04:01 EST 2014


Okay, okay, I can take a hint. I'll call Steve tomorrow. I should anyway. I haven't talked with him for a while. I really need to keep in touch more often.
 

 

 

-----Original Message-----
From: Dennis Pleau via VirtualVairs <virtualvairs at corvair.org>
To: 'Virtual Vairs' <virtualvairs at corvair.org>
Sent: Tue, Dec 2, 2014 7:17 pm
Subject: Re: <VV> 64 Suspension on a 62


I know you can get one in Golden, CO

dp

-----Original Message-----
From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf Of
jwcorvair--- via VirtualVairs
Sent: Tuesday, December 02, 2014 5:41 PM
To: mmccrae6 at cox.net; shortle556 at earthlink.net; virtualvairs at corvair.org
Subject: Re: <VV> 64 Suspension on a 62

Hi Mike,

I live in Boulder, Colorado. Do you have diff that can fit a power glide?
Shortie is right (of course). I need to find the correct diff.

Joe

 

 

 

-----Original Message-----
From: Mike McCrae <mmccrae6 at cox.net>
To: shortle <shortle556 at earthlink.net>; jwcorvair <jwcorvair at aol.com>;
virtualvairs <virtualvairs at corvair.org>
Sent: Tue, Dec 2, 2014 3:45 pm
Subject: Re: <VV> 64 Suspension on a 62


Joe....where do you live....? I have a few!
Mike McCrae

-----Original Message----- 
From: shortle via VirtualVairs
Sent: Tuesday, December 02, 2014 1:27 PM
To: jwcorvair at aol.com ; virtualvairs at corvair.org
Subject: Re:  64 Suspension on a 62


Hi Joe, My advice is FIND the correct '64 diff. case. They made a lot of 
them. Either a 3 speed or 4 speed will work. You also get to have the diff. 
dipstick then. I'll even bet Steve has 1 to sell you.
Timothy Shortle in Durango Colorado 81301

-----Original Message-----
>From: jwcorvair--- via VirtualVairs <virtualvairs at corvair.org>
>Sent: Dec 2, 2014 2:03 PM
>To: virtualvairs at corvair.org
>Subject: <VV> 64 Suspension on a 62
>
>
>Hi,
>I am in the process of installing a 64 suspension on a 62 four door. I have

>all of the suspension components from the 64 so that is no problem. What I 
>do not have is a 64 differential to mount the leaf spring; I have only my 
>62 differential. Is it possible to "mount" the 64 leaf spring to an earlier

>differential? I would think that it would be possible, but I am not certain

>of the pitfalls or modifications necessary to make a 64 leaf spring work 
>with an earlier differential. Possibly fabricating a mount similar to the 
>Empi camber compensator but suited more for a 64 leaf spring.
>
>Any ideas?
>
>Joe White
>(62 four door, 64 Spyder project, 66 Porvair)


 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________

 


More information about the VirtualVairs mailing list