<VV> '63 HD spring spec

Bill Hubbell whubbell at verizon.net
Tue Dec 30 10:08:27 EST 2014


Yes, we collect and display whatever we get.   There is already some spring data on the site but more information is needed.  

Unfortunately, up to this point only a small number of people have chosen to submit information or research.  We welcome any and all new contributors. 

Bill

On Dec 29, 2014, at 4:54 PM, jwcorvair at aol.com wrote:

Oooops. Boy, am I embarrassed. I know of the stock Corvair organization, but lost the link and forgot that it was still around. I'll have to register again.

So, does the stock site retain this type of information? In particular, I'm thinking of scanned or PDF versions of the information such as engineering drawings. It would be good if we could collect all of that information on the stock site. I certainly would be willing to help expand the data base of Corvair information.

Regards,
Joe White


-----Original Message-----
From: Bill Hubbell <whubbell at verizon.net>
To: jwcorvair <jwcorvair at aol.com>
Cc: noahsarkinc <noahsarkinc at earthlink.net>; bryan <bryan at skiblack.com>; virtualvairs <virtualvairs at corvair.org>; Kent Sullivan <kentsu at corvairkid.com>; Marissa Andolino <mandolin at rochester.rr.com>
Sent: Sat, Dec 27, 2014 9:57 pm
Subject: Re: <VV> '63 HD spring spec

Joe,

You answered your own question and then you dismissed the answer. 

Yes, indeed, we DO have a CORSA chapter dedicated to documenting and preserving 
information about Stock Corvairs, including original  parts, etc. and yes, 
indeed, the Stock Corvair Group does have a website devoted to serving as a 
repository for such information.  

As for the site not being "universally viewed", well, whose fault is that?

Any club is only as strong as its members, and only as useful as its membership 
wants it to be. 

Instead of asking to reinvent the wheel, why not work with the wheel we already 
have.  If you think the SCG site is not meeting your needs, please contribute 
something to it.

FYI, we are close to releasing an updated site - expect an announcement soon.  
In the meantime, please visit the existing site (http://stock.corvair.org) and 
let us know what else you would like to have there.  We welcome any and all 
contributions to the effort to research, document, and preserve our Stock 
Corvair Heritage. 

Bill Hubbell
President, Stock Corvair Group 

On Dec 27, 2014, at 2:10 PM, jwcorvair--- via VirtualVairs <virtualvairs at corvair.org> 
wrote:

Hi,

Would it be possible for you to post pictures of the parts on VV.  I think that 
as time passes we are loosing information about what constitutes original parts 
from our Vairs. What would be useful is if we had a repository on the CORSA or 
some other site for information about original parts for our cars. I know that 
we have a site devoted to stock cars, but I'm not certain that site is 
universally viewed.

Regardless, I think that it is important and useful if we can record all that we 
know about Corvair features and components.

Regards,
Joe White (62 four door, 64 Spyder project, 66 Porvair)







-----Original Message-----
From: Dusty Steinberg via VirtualVairs <virtualvairs at corvair.org>
To: Bryan Blackwell <bryan at skiblack.com>; Virtual Vairs <virtualvairs at corvair.org>
Sent: Thu, Dec 25, 2014 9:07 pm
Subject: Re: <VV> '63 HD spring spec


I don't have a pair of the HD springs, but I did have them on a 1963 Spyder 
convertible that I once owned.  If I remember correctly, they were a heavier 
wire, than the standard springs.  The one thing that I do recall vividly, was 
that the HD suspension package included rear rebound straps that limited the 
amount of travel that the rear lower control arm could drop.  This s clearly 
shown how it was accomplished in the 1962 Factory Assembly manual.  I do have a 
pair of rear lower control arms with the brackets welded to them, and the 
rebound strap steel plates that mounted under the rubber bumper, along with the 
small steel plates that were used to hold the two halves of the rebound strap 
where it went through the lower control arm bracket.  I even have a pair of NOS 
rebound straps.  I have kept all these parts together for many years, and was 
planning on installing them on a 1962 or 1963 Spyder if I ever bought one, but 
so far, I haven't come across a car to my liking.  I don
't want to sell them at this time.  I have been talking with a machine shop 
about reproducing the parts.  Nothing set in stone quite yet. 
Paul in CT


-----Original Message-----
> From: Bryan Blackwell via VirtualVairs <virtualvairs at corvair.org>
> Sent: Dec 25, 2014 10:32 PM
> To: Virtual Vairs <virtualvairs at corvair.org>
> Subject: <VV> '63 HD spring spec
> 
> Hi folks,
> 
> Hope everyone had a Merry Christmas!
> 
> There have been several threads in the past that included discussion of the 
'62/'63 HD suspension.  I know it included a front sway bar, but I don't know 
what the difference is between normal and HD springs.  If anyone can supply that 

info, I'd appreciate it.  If by chance you have an extra set of these springs 
you'd like to sell, please let me know where you are and what you'd like to get 
for them.
> 
> --Bryan
> 
> Bryan Blackwell | Springfield, Va. | bryan at skiblack.com | http://autoxer.skiblack.com/  


> Corvairs: '62 700 Wagon, '64 Greenbrier, '65 Corsa, '66 Corsa
> '69 Road Runner, '99 Neon R/T, '00 Miata SE, '09 Ford F-150
> "Why do something if you're not going to obsess about it?"
> 
> 
> 
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the 

property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________

_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
_______________________________________________


_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
_______________________________________________


More information about the VirtualVairs mailing list