<VV> Regulator changeout
Dave Keillor
dkeillor at tconcepts.com
Mon Mar 24 12:40:22 EDT 2014
Polarization is for generators. It puts residual magnitism of the correct
polarity into the field. This allows the generator to self-start. It's
not need with alternators.
Dave Keillor
On Mon, Mar 24, 2014 at 10:08 AM, <Sethracer at aol.com> wrote:
> Read up on the procedure in the shop manual. I thought it was the Generator
> itself that needed polarizing, not the regulator, but it has been many
> years. Be sure to disconnect the battery first. Harry is referring to the
> rusty-screw problem, at least on late models, where the mounting point
> stand-offs for the regulator have the screws rusted behind, so when you
> go to pull
> the screws out, the mounts just turn in place. Frustrating! If your mounts
> look "weathered", you might want to "Kroil" them or use another
> penetrating
> fluid on the threads ahead of time. And, maybe, have some vice grips
> handy. - Seth
>
>
> In a message dated 3/24/2014 6:34:05 A.M. Pacific Daylight Time,
> klundy at optimum.net writes:
>
> I've never replaced one of these before, but it looks pretty simple.
> If anyone has any installation advice, I would greatly appreciate it!!
>
>
> Regards,
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
More information about the VirtualVairs
mailing list