<VV> Regulator Mounts

[Dave Keillor]

The maddening rubber mounts are Wellnuts and should be available in a good
hardware store.  I usually hold the rubber part with a pair of pliers of
vice grips.


Dave Keillor


On Mon, Mar 24, 2014 at 11:41 AM, <hallgrenn at aol.com> wrote:

>
> It can be maddening to remove the regulator.  It's been a while since I
> removed one, but I was most successful when I got a small wire brush in the
> plenum behind and cleaned the rust on the exposed threads and then sprayed
> them with Liquid Wrench or at least WD4.  Sometimes the rubber mounts
> survived too.
>
> Bob Hall
>
>
> -----Original Message-----
> From: Harry Yarnell (Verizon) <harryyarnell at verizon.net>
> To: 'Ken Lundy' <klundy at optimum.net>; 'VirtualVairs E-Mail List' <
> virtualvairs at corvair.org>
> Cc: Sethracer <Sethracer at aol.com>
> Sent: Mon, Mar 24, 2014 9:39 am
> Subject: Re: <VV> Boiling Battery
>
>
> Looks simple to remove...till you try to unscrew the three mounting
> bolts...
>
>
>
>
>
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>