<VV> 4.3 flex plate to corvair Torque converter

Mike McCrae mmccrae6 at cox.net
Fri Oct 24 14:14:15 EDT 2014


I fabricated a center to adapt to the nose on the ‘Vair converter. This is  to insure proper alignment when bolting on the coverter. 
The holes, center to center (radius) are 4.8068, and I used size “Z” drill to duplicate the hole in the Corvair flex plate.

Mike McCrae 
4.3 flex plate to corvair Torque converter
https://onedrive.live.com/redir.aspx?cid=602caa6d820b1915&page=browse&resid=602CAA6D820B1915!734&parId=602CAA6D820B1915!105&type=5&authkey=!AAQq8A9F7IPjOFI&Bsrc=Photomail&Bpub=SDX.Photos
You have been sent 2 pictures.

IMG_1742.JPG
IMG_1743.JPG

These pictures were sent with Picasa, from Google.
Try it out here: http://picasa.google.com/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 135511 bytes
Desc: not available
URL: <http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20141024/5bd4d606/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 36447 bytes
Desc: not available
URL: <http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20141024/5bd4d606/attachment-0001.png>


More information about the VirtualVairs mailing list