<VV> [fastvair] noisy lifter
thestgeans0625 at att.net
Wed Aug 19 17:54:51 EDT 2015
Had a similar problem, Michael. Check to see that all the valve guides are tight and in place. I've had two cases where the valve guide came loose in the head, making the same noise.
Bruce St. Gean
Sent from my iPhone
> On Aug 19, 2015, at 2:23 PM, Michael Kovacs kovacsmj at yahoo.com [fastvair] <fastvair at yahoogroups.com> wrote:
> Tearing my hair out and I don't have too much left. A friends Corvair.
> Problem: an otherwise smooth running 102 PG has a loud engine "clack".
> History: rebuilt 102 engine several years ago with no $ spared. All parts from Clark. Lifters, cam, rocker arms, push rods, springs etc. Very low mileage after the restoration.
> The engine seems to have developed one noisy lifter. It is loud like the rocker arm wasn't tight enough, leaving clearance between the rocker arm and the valve.
> We first did a hot adjustment, as it was convenient to do that. That did not seem to work. Same noise
> Today we did a very careful cold adjustment by the book using 3/4 turn down after lash was removed, changed oil and filter. Same old noise. The only thing I could see was that one nut on a rocker did not seem to be turned down the usual 3-4 threads after adjustment (maybe 2.5).
> I've rebuilt and adjusted many valve trains and now I'm stumped. Would it hurt to slowly turn the one I suspect, down 1 or 1.5 turns hot?
> As an aggressive alternate, do you think putting different lifter in the one I suspect prove anything if all else fails?
> Posted by: Michael Kovacs <kovacsmj at yahoo.com>
> Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (1)
> This list is for racing/modifying our Corvairs,and to buy/sell parts.
> homepage http://groups.yahoo.com/group/fastvair "sign in" at upper right of page for archives, edit your membership(digest,unsubscribe)
> Post message: fastvair at yahoogroups.com
> VISIT YOUR GROUP
More information about the VirtualVairs