<VV> Early model electric fuel pump question

[Sethracer at aol.com]

I believe that someone still makes a three position single-pole toggle  
switch, with the center off, snap switch closed in one direction and  momentary 
(spring loaded) in the other direction. When wired correctly, that  would 
solve your stated needs. - Seth 
 
 
In a message dated 3/14/2015 9:52:14 A.M. Pacific Daylight Time,  
virtualvairs at corvair.org writes:

-  Depending on how you do the wiring, a cutoff switch so you can turn the 
pump  off for when you want to do carb work, or one to prime the carbs after 
it's  sat for a little while is  handy.