<VV> Exhaust gas + Diff seal

[J. R. Read]

And the STRONG ORDER you smell in the heater just might be the 90wt oil from 
the diff.  It has a VERY distinctive odor - even when new (fresh).

Later, JR

----- Original Message ----- 
From: "Ignacio Valdes via VirtualVairs" <virtualvairs at corvair.org>
To: "MarK Durham" <62vair at gmail.com>
Cc: "Charlie" <chaz at properproper.com>; "Virtual Vairs" 
<virtualvairs at corvair.org>
Sent: Saturday, March 14, 2015 5:28 PM
Subject: Re: <VV> Exhaust gas into heater


> See my other post. The pan was leaking from the bolts working loose but 
> see
> the other thingie leaking as well. Clarks I guess for the lower shrounds,
> thermostats and linkage. I have other issues to attend to first but to
> remove flashing from the cylinder fins do you have to take all the oil
> pipes off? -- IV
>
> On Sat, Mar 14, 2015 at 2:05 PM, MarK Durham <62vair at gmail.com> wrote:
>
>> Yes, your lower shrouds, thermostats and linkage appear to be gone. But
>> before you take that all apart, look for oil leaks down onto the exhaust.
>> That really smells bad. Most people cannot smell carbon monoxide.
>>
>>
>> Mark Durham
>> Hauser, Idaho
>> 62 Monza coupe Red/Red 4 speed
>>
>> On Sat, Mar 14, 2015 at 8:41 AM, Charlie via VirtualVairs <
>> virtualvairs at corvair.org> wrote:
>>


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com