<VV> Exhaust gas into heater

[J. R. Read]

Thanks Bill, I was not previously aware of that.  I DID say that I'm not a 
pro on EMs.
Later, JR

----- Original Message ----- 
From: "Bill Hubbell" <whubbell at verizon.net>
To: "J. R. Read" <hmlinc at sbcglobal.net>
Cc: "Ignacio Valdes" <ivaldes at hal-pc.org>; "Charlie" 
<chaz at properproper.com>; "Virtual Vairs" <virtualvairs at corvair.org>
Sent: Sunday, March 15, 2015 8:20 AM
Subject: Re: <VV> Exhaust gas into heater


Let's clear something up. He said this is a Coupe, which means there are 
long hoses running through the rocker panels.  Only on the convertibles did 
they pressurize the rocker.  The convertible rockers have an extra 
reinforcement panel running through them which precludes the use of the 
hose.

Bill

On Mar 15, 2015, at 1:26 AM, J. R. Read via VirtualVairs 
<virtualvairs at corvair.org> wrote:

So, is there a rust problem where you are?  The pic which showed the half 
shaft looked pretty rusty on the axle.

The reason that I ask that is because you want heat to the windshield.. The 
heat has to pass through the rocker panels on an EM.  The rocker panels are 
pressurized to get heat forward and if they have any rust-through, much of 
that needed pressure will escape before it ever makes it to the front.

Later, JR


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com