<VV> Noisy lifter

[Dennis Pleau]

Adjust them cold.  No reason to adjust them hot.

dp

-----Original Message-----
From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf Of
mrmaxum--- via VirtualVairs
Sent: Tuesday, March 17, 2015 3:03 PM
To: VirtualVairs at corvair.org
Subject: <VV> Noisy lifter

I just  put pushrod tube seals in my 62 Rampside, the motor ran great and
was very quiet just leaked oil. I adjusted the valves the way I was told,
adjusted cold, started let motor get warm and re adjusted warm.  I've got a
lifter that is very loud.  Good friend (has Corvairs) told me to run the
truck and get warm and put half can of sea foam in and should take care.
Didn't do it, the motor runs good not a miss and runs smooth.  Lifters were
quiet before I put the seals in now got a loud one.  Any tricks or ideas?
Thanks  



---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com