<VV> Sanity check> fan bolt torque - 2
BBRT
chsadek at comcast.net
Sun Nov 1 18:47:44 EST 2015
Try this..
http://www.portlandbolt.com/technical/bolt-torque-chart/#bolt-torque-a325 Note there are different grades of bolts..Have to try each chart unless you know which rating goes with the grade five and grade 8..
Chuck S
-----Original Message-----
From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf Of Randy Hook via VirtualVairs
Sent: Sunday, November 1, 2015 6:43 PM
To: virtualvairs at corvair.org
Subject: <VV> fan bolt torque - 2
Hi guys,
Just to clarify a couple things. 1. Yes, I am talking about the bolts that hold the pulley and blower to the blower bearing. 2. Yes, the '61 shop manual DOES say 20-25 FT LBS. Here is the quote directly from the manual: "2. Tighten bolts and lockwashers and torque to 20 -25 ft lbs." Again, another one for your list, Bob.
Randy (Cap'n) Hook
Hopewell, PA
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
More information about the VirtualVairs
mailing list