<VV> Parade Paranoia
MarK Durham
62vair at gmail.com
Mon Nov 9 00:52:25 EST 2015
Matt, I was heading down the same road myself. It could be at the hrpt, or
maybe the resister wire in the harness has a bad spot.
One day I was doing some adjustments due to a cranky running engine and I
saw a puff of smoke come out of the wire bundle back where the bundle makes
a turn at aft left of the engine compartment, where the resister wire makes
a turn and heads back towards the hrpt staying inside the wrapped bundle,
and the engine quit.
I replaced the harness but removed the resistance wire from the circuit and
added a resister block back by the distributor.
Mark Durham
Hauser, Idaho
On Nov 8, 2015 8:30 PM, "Matt Nall via VirtualVairs" <
virtualvairs at corvair.org> wrote:
> I would say you have a bad electrical connection on top of the engine that
> gets hot when idling only...
>
>
> Next parade........jump 12 vdc POS to coil + and see if it stalls.....
> won't hurt the coil / points, if engine is running..
>
>
> Matt Nall
> Charleston, Oregon
> http://tinyurl.com/The-Corvair-Patio
>
> http://tinyurl.com/Matts-Tech-Pages
>
>
>
>
>
>
>
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> Archives: http://www.vv.corvair.org/archive.htm
> _______________________________________________
>
More information about the VirtualVairs
mailing list