<VV> Plugged line help?

[wfcc at mediacombb.net]

I'm hoping this is off the car ...... <Grin>

                                      Ed Lindsay
                                        West Florida Corvair Club
----- Original Message -----
From: Grant Young via VirtualVairs <virtualvairs at corvair.org>
To: virtualvairs at corvair.org
Sent: Wed, 20 Jan 2016 17:34:44 -0500 (EST)
Subject: <VV> Plugged line help?

I have a turbo main fuel line (the one from the firewall to the pump with lots of bends in it) in which a dirt dauber wasp or some such vector has put a plug. It seems to be just past the second bend from the firewall (I can fish a flexible line that far, but it is too limber to push it out). I have tried carb cleaner, WD-40, water, and blaster soaks (over night) followed with 140 psi of compressed air to no avail. If I had something that was sturdy enough to punch on it and still be able to bend around the corners I think I could dislodge it. I have tried plastic line from a weed-eater, copper wire, spraying carb cleaner through its red tube, etc. I have worked on this for several days (a few minutes at a time after long soaks in the various chemicals) and am near wits end. Any serious suggestions will be appreciated. (I'm working on how to use a pressure washer on it). 
Thanks,
Grant
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________