<VV> Electrical? problem

Daniel Monasterio González dmonasterio at hotmail.com
Sun Mar 27 20:52:14 EDT 2016

   By the symptoms, your car has the original type flasher (button
shaped). It's blinking rate depends on the current passing thru it.
Change to the electronic type (longer and heavier) and you'll have the
same blinking rate all the time. It blinks the same thru various voltages
without depending on the current so, it will blink ok with 1 or up to
several bulbs.
   It's only con is that the OEM type is designed for 2 bulbs and, in the
event that one of them fails, the flasher will stop blinking, giving the
advice that one bulb failed.


On 27/03/16 16:38, "Ralphsebrell via VirtualVairs"
<virtualvairs at corvair.org> wrote:

>My turn signals will dinka at the regular speed, but at low RPM (800)
>they slow and slower. Increase RPM they slowly return to normal flash.
>speed Any suggestions?
>Ralph Sebrell
>69 140/4 vert
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights
>are the property
>of the writer, please attribute properly. For help,
>mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America,
>Post messages to: VirtualVairs at corvair.org
>Change your options:
>Archives: http://www.vv.corvair.org/archive.htm
> _______________________________________________

More information about the VirtualVairs mailing list