<VV> Winching onto trailer

[Mike Kost]

Bryan,

Why do you want to put the `65 on backward? I would pull it on forward 
using a strap around the front crossmember. You might be able to hook to 
the transmission crossmember if it is there otherwise you might be able 
to go under the car to the front crossmember.

Mike Kost

On 5/2/2016 9:16 AM, Bryan Blackwell via VirtualVairs wrote:
> Thanks Mike, but I don't have anything from the firewall to the rear engine mount on the '65, just the rear trailing arms and a 2x4 across to keep it braced.  Maybe t-hooks in the body holes?  I know they use those to tie the cars down with, but I can't recall if you can pull on them.  Of course with no powertrain it's a lot less weight, so maybe that would work ok anyway.  Sounds like the GB should be no problem.
>
> --Bryan
>
>> On May 2, 2016, at 9:52 AM, Mike Moyer <vairvert67 at yahoo.com> wrote:
>>
>> Any where on the suspension cross member will work. A arm on the Brier.
>>   
>> Mike Moyer
>   _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> Archives: http://www.vv.corvair.org/archive.htm
>   _______________________________________________
>