<VV> unusual starter problem
corvairduval at cox.net
corvairduval at cox.net
Fri May 6 17:35:09 EDT 2016
On a PG, just look in the big air hole (behind right rear tire) at the ring
gear. You can have someone turn the crank with a wrench, or just use a
screwdriver/pry bar on the teeth through that hole.
Frank DuVal
Original email:
-----------------
From: Jim Simpson via VirtualVairs virtualvairs at corvair.org
Date: Fri, 6 May 2016 16:21:26 -0400
To: virtualvairs at corvair.org
Subject: Re: <VV> unusual starter problem
While it may be the starter -- anything from a broken nose to ?, check the
ring gear on the torque converter carefully. It may have lost a tooth or
three. PG ring gears have this problem.... It happened to a local club
member and we ended up changing out the torque converter.
(You'll need to pull the starter and look in the mounting hole to see the
teeth. It helps if someone else can rotate the engine with a wrench while
you are watching the ring gear.)
Jim Simpson
Group Corvair
--------------------------------------------------------------------
mail2web.com ? Enhanced email for the mobile individual based on Microsoft?
Exchange - http://link.mail2web.com/Personal/EnhancedEmail
More information about the VirtualVairs
mailing list