<VV> Sun visors

[Daniel Monasterio González]

Try taking out the spindle and then, using two wooden pieces (behind and
above the sun visor) do some hammering to crimp slightly the sheet metal
inside. Do it gently to get only a little crimping.
It is a try and check way.

Did it on the Bluebrier visors and worked fine.

Daniel Monasterio.

On 18/05/16 10:30, "Mike Jacobi via VirtualVairs"
<virtualvairs at corvair.org> wrote:

>Early convert. Sunvisors tend to drop down on their own. The spindle is
>locked tight in the central holder and stays still but visor rotates on
>the spindle. I am about to open up the visor and glue inside to the
>spindle but wonder if there is an easier way.
>
>Signed By Mike Jacobi
>
>
>
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights
>are the property
>of the writer, please attribute properly. For help,
>mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America,
>http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options:
>http://www.vv.corvair.org/mailman/options/virtualvairs
>Archives: http://www.vv.corvair.org/archive.htm
> _______________________________________________
>