<VV> 1968 Monza 140 4 speed Convertible for sale
jkean at sbcglobal.net
Tue Sep 19 21:26:07 EDT 2017
Please send all replies to the this email address: jkean at sbcglobal.net
This ad has also been posted on Facebook (Corvair Owners Group) too.
On 9/19/2017 7:22 PM, Elaine and Jack Kean via VirtualVairs wrote:
> I posted a few pictures of the car, the interior, and engine bay.
> Pictures of the outside are old, but represent the car.
> Pictures can be found here: https://imgur.com/gallery/6yZhT
> The price of the car is in the body of the advertisement (below). This
> car also has the high output heater fan motor with the proper relay
> Best regards,
> jack kean
>> Date: Mon, 18 Sep 2017 20:04:16 -0500
>> From: Jack Kean <jkean at sbcglobal.net>
>> To: Virtual Vairs <VirtualVairs at corvair.org>
>> Subject: <VV> 1968 Monza 140 4 speed Convertible for sale
>> Message-ID: <8588d91a-908b-0a7c-1ca5-4b6c7e4cde3a at sbcglobal.net>
>> Content-Type: text/plain; charset=utf-8; format=flowed
>> 1968 Corvair 140 4 speed Convertible for Sale; Repainted with factory
>> Evening Orchid
>> Bought to become a daily driver 13 years ago. Plan was to finish it with
>> rebuilt suspension/steering/brakes, but life (family, then cancer) got
>> in the way.
>> Originally built by John Polacchi (Manton, California) with a slight
>> custom applied (gas filler in trunk, door latches from 49 Lincoln, some
>> removal of trim). I picked it up from a third party near Santa Barbara
>> California with a "fresh" locally built engine, and new convertible top.
>> A good 25 foot car. Always garaged. Have some of the history of the car
>> from the original owner.
>> Car devoured the OT10 cam shortly after I purchased it in 2004, which
>> abruptly changed my plans. Sat in my garage for a number of years, then
>> underwent rebuild of engine (with some advice from the late Ed Corson):
>> - 10/10 nitrided crank, 040 Forged pistons, recon rods with Arp bolts,
>> h/p oil pump, deep seat heads (Fumio Fukaya), new valve train, including
>> NOS factory 304 cam, balanced, real Dale distributor with Pertronix,
>> SafeGuard knock control system, deflashed, all oil passages deburred and
>> cleaned up (case halves, rear housing, crankshaft, ...), rebuilt
>> carburetors, high output alternator, new plug wires, mounts and
>> bushings. Probably more stuff than I remember at this point. Never got
>> this engine completely sorted out.
>> New fuel tank, including all hoses and sender, and external front mount
>> electric fuel pump with inertia sensor and fuel pump controller (by
>> David Heath). Rebuilt pressure plate (Larry Claypool), real Dale bolted
>> flywheel, American aluminum 16" wheels with tires that no doubt will
>> need to be replaced. Factory adjustable column (pre-1968 version) with
>> decent wood steering wheel. 3.27 open differential, with Saginaw
>> transmission. Corsa dash (working clock and factory CHT), with Autometer
>> gauges below center console, plus dual CHT (still in box). The
>> non-factory interior is nothing to write home about. Top was new in
>> This is a complete car that ran and had proper registration/inspection
>> when I stopped driving it in 2013. This is not a barn find.
>> Engine/transaxle needs to be sorted then onto suspension, brakes,
>> steering and finally the interior. Most parts listed as new were
>> purchased and installed prior to 2010. The car has not been driven more
>> than a few thousand miles (or less) since then.
>> *$5000 *(a small fraction of what I have in it); includes all parts
>> that I
>> have acquired and a correct CoverCraft Corvair car cover.
>> Second time I have sold everything and "left" the Corvair family (sold
>> everything I had in 1991 to Chris Langley). Car has always been garaged
>> in Arlington, Texas. I will find a picture or two and post them.
>> I need the space to park my new 435i convertible.
>> Someone needs to be driving this car when it turns 50.
>> Jack Kean Arlington, Texas
>> This message was sent by the VirtualVairs mailing list, all
>> copyrights are the property
>> of the writer, please attribute properly. For help, mail to:
>> vv-help at corvair.org
>> This list sponsored by the Corvair Society of America,
>> VirtualVairs at corvair.org
>> Change your options:
>> End of VirtualVairs Digest, Vol 152, Issue 21
>> This email has been checked for viruses by AVG.
> This message was sent by the VirtualVairs mailing list, all copyrights
> are the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> Archives: http://www.vv.corvair.org/archive.htm
More information about the VirtualVairs