<VV> Rear wheel cylinders. And lousy brakes?????????????

[Dave Foster]

Thanks for the info.. New wheel cyls, hoses, shoes, drums turned??? CAR still barely wants to STOP.   ANY THOUGHTS?

Thanks, 
Dave Foster
63 Spyder
Westlake, OH

-----Original Message-----
From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf Of Frank DuVal via VirtualVairs
Sent: Thursday, August 16, 2018 10:49 PM
To: virtualvairs at corvair.org
Subject: Re: <VV> Rear wheel cylinders

The two blots holding them on are 3/8” head 1/4-20 bolts. Very shallow head. Need 6 point wrench, a socket will not fit.

To get more room you can remove the four nuts holding the axle bearing and backing plate onto the lower a arm.

Frank DuVal

> On Aug 16, 2018, at 10:35 PM, David Foster via VirtualVairs <virtualvairs at corvair.org> wrote:
> 
> What is the procedure for removing the rear brake wheel cylinders from 
> a 63 Spyder?
> 
> 

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property of the writer, please attribute properly. For help, mailto:vv-help at corvair.org This list sponsored by the Corvair Society of America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________