<VV> Ignition Woes

Bill H. gojoe283 at yahoo.com
Sun Feb 4 22:59:34 EST 2018

Seth, I hope I'm doing this correctly.   As I understand it, Crane units can run with the stock (points) coil.  That's what I'm using.
I checked voltage going to the plus side of the coil, it's around 9 volts.  I assume that means the resistor wire is engaged and is stepping the voltage down.
I'd appreciate any feedback in case I'm not on the right track, many thanks!...Bill

More information about the VirtualVairs mailing list