<VV> Stuck valve cover bolt. / Head Removal
Jim Becker
mr.jebecker at gmail.com
Sun Feb 11 11:49:23 EST 2018
Not to mention a whole row of bolts through the top shroud, the generator
support and virtually everything else that's is still attached to the head.
Don't you have anyone local that can come point out the obvious? How about
spending some time staring at the diagrams in the parts catalog, or even the
Clark's catalog? If something is bolted to both the head and something
else, it has to be unbolted for the head to move.
Jim Becker
-----Original Message-----
From: Matt Nall via VirtualVairs
Sent: Sunday, February 11, 2018 10:11 AM
To: virtualvairs at corvair.org
Subject: Re: Stuck valve cover bolt. / Head Removal
-----Original Message-----
From: Ignacio Valdes
Hi, so I have the rockers off and the stud nuts off. See picture.The head
isn't budging though so I am wondering what else I have to take off to get
the head loose?
========================================================
There a 9/16" headed bolt inside the heater duct...
Matt Nall
Charleston, Oregon
http://tinyurl.com/The-Corvair-Patio
http://tinyurl.com/Matts-Tech-Pages
More information about the VirtualVairs
mailing list