<VV> Clogged Spray Can

[Jay Maechtlen]

On 3/9/2018 6:35 PM, Paul Siano via VirtualVairs wrote:
> I have a very old can of Clark's trunk grey/white splatter paint.
> I have unclogged the nozzle but the can is clogged.  I have tried putting a little acetone in the opening with no success.
> Any ideas would be appreciated.
> Paul Siano

Compressed air nozzle on it, with o-ring or whatever to give a bit of seal.
Blowing back into the can may clear the feed tube.

I've done that on various cans, haven't exploded any yet!
-- 
Jay Maechtlen
SoCal
'61 2-dr modified w/fiberglass skin,
transverse 3.8 Buick V6 TH440T4 trans