<VV> Installing a 66 4sp transmission to a 65 Corvair

Paul Fox paulvair at yahoo.com
Fri Dec 18 09:00:56 EST 2020 

 Shifter linkage is shorter too.Paul Fox
    On Friday, December 18, 2020, 12:25:02 AM EST, Thomas Gould via VirtualVairs <virtualvairs at corvair.org> wrote:  
 
 Jerry, you have to change the trans cross member and the input shaft 
(longer). Also the accelerator bracket is different and  attaches to the 
trans.

i-----Original Message----- 
From: virtualvairs-request at corvair.org
Sent: Thursday, December 17, 2020 2:43 PM
To: virtualvairs at corvair.org
Subject: VirtualVairs Digest, Vol 191, Issue 16

Send VirtualVairs mailing list submissions to
virtualvairs at corvair.org

To subscribe or unsubscribe via the World Wide Web, visit
http://www.vv.corvair.org/mailman/listinfo/virtualvairs
or, via email, send a message with subject or body 'help' to
virtualvairs-request at corvair.org

You can reach the person managing the list at
virtualvairs-owner at corvair.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of VirtualVairs digest..."


Please also edit to include only the topic you're responding to when 
replying to a Digest.
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly.
For help, mail to: vv-help at corvair.org
Archives at http://www.vv.corvair.org/archive.htm
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs


Today's Topics:

  1. Installing a 66 4 speed transmission to a 65 Corvair (Jerry Brown)
  2. Re: anybody seen this V8 conversion? (Dave) (Dave Leonard)
  3. Re: Installing a 66 4 speed transmission to a 65 Corvair
      (Harry Yarnell (Verizon))
  4. Re: anybody seen this V8 conversion? (Dave) (mark at noakes.com)
  5. Re: anybody seen this V8 conversion? (Dave) (jvhroberts at aol.com)
  6. Re: Installing a 66 4 speed transmission to a 65 Corvair
      (jvhroberts at aol.com)


----------------------------------------------------------------------

Message: 1
Date: Thu, 17 Dec 2020 17:18:59 +0000 (UTC)
From: Jerry Brown <air_cooled63 at yahoo.com>
To: "virtualvairs at corvair.org" <virtualvairs at corvair.org>
Subject: <VV> Installing a 66 4 speed transmission to a 65 Corvair
Message-ID: <220268251.1807098.1608225539839 at mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8

Is there any special things to be done before installing a 66 4 speed 
transmission into a 65 4 speed Corvair.

Jerry Brown65 Corsa?

------------------------------

Message: 2
Date: Thu, 17 Dec 2020 12:50:01 -0500
From: "Dave Leonard" <dave at arborlea.com>
To: <virtualvairs at corvair.org>
Subject: Re: <VV> anybody seen this V8 conversion? (Dave)
Message-ID: <000a01d6d49d$0be83690$23b8a3b0$@arborlea.com>
Content-Type: text/plain; charset="us-ascii"

Amazing workmanship!

I'm puzzled by the transaxle however.  Not sure what it's from - Porsche?
But I didn't think any like this could take the axle side-loads as the upper
link for the suspension?

http://www.lonniesplace.com/corvair-project

Dave



------------------------------

Message: 3
Date: Thu, 17 Dec 2020 13:38:49 -0500
From: "Harry Yarnell \(Verizon\)" <harryyarnell at verizon.net>
To: "'Jerry Brown'" <air_cooled63 at yahoo.com>,
<virtualvairs at corvair.org>
Subject: Re: <VV> Installing a 66 4 speed transmission to a 65 Corvair
Message-ID: <002701d6d4a3$dcb908c0$962b1a40$@net>
Content-Type: text/plain; charset="UTF-8"

Transmission or transaxle?
The '66 tranny mounts with six bolts; the '65, four bolts.
Not sure of the shafts; been awhile.



-----Original Message-----
From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf Of 
Jerry Brown via VirtualVairs
Sent: Thursday, December 17, 2020 12:19 PM
To: virtualvairs at corvair.org
Subject: <VV> Installing a 66 4 speed transmission to a 65 Corvair

Is there any special things to be done before installing a 66 4 speed 
transmission into a 65 4 speed Corvair.

Jerry Brown65 Corsa
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
_______________________________________________



------------------------------

Message: 4
Date: Thu, 17 Dec 2020 13:47:55 -0500
From: "mark at noakes.com" <mark at noakes.com>
To: Dave Leonard <dave at arborlea.com>, virtualvairs at corvair.org
Subject: Re: <VV> anybody seen this V8 conversion? (Dave)
Message-ID: <dc44911a-6f20-112b-5d75-210332ed2cb6 at noakes.com>
Content-Type: text/plain; charset=utf-8; format=flowed

Yes on the Porsche transaxle. 930.

Interesting that he said nobody makes a kit for disc brakes on Corvairs
so he had to make his own. He's not well connected into the community.

Mark N

On 12/17/20 12:50 PM, Dave Leonard via VirtualVairs wrote:
> Amazing workmanship!
>
> I'm puzzled by the transaxle however.  Not sure what it's from - Porsche?
> But I didn't think any like this could take the axle side-loads as the 
> upper
> link for the suspension?
>
> http://www.lonniesplace.com/corvair-project
>
> Dave
>
>



------------------------------

Message: 5
Date: Thu, 17 Dec 2020 19:42:09 +0000 (UTC)
From: jvhroberts at aol.com
To: "virtualvairs at corvair.org" <virtualvairs at corvair.org>
Subject: Re: <VV> anybody seen this V8 conversion? (Dave)
Message-ID: <2062638492.1926676.1608234129975 at mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8

The side bearings are larger than what's in a Corvair transaxle. And being a 
spiral bevel final drive, the gear loads are lower than in a hypoid drive.?


-----Original Message-----
From: Dave Leonard via VirtualVairs <virtualvairs at corvair.org>
To: virtualvairs at corvair.org
Sent: Thu, Dec 17, 2020 12:50 pm
Subject: Re: <VV> anybody seen this V8 conversion? (Dave)

Amazing workmanship!?

I'm puzzled by the transaxle however.? Not sure what it's from - Porsche?
But I didn't think any like this could take the axle side-loads as the upper
link for the suspension?

http://www.lonniesplace.com/corvair-project

Dave

_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
_______________________________________________


------------------------------

Message: 6
Date: Thu, 17 Dec 2020 19:43:40 +0000 (UTC)
From: jvhroberts at aol.com
To: "virtualvairs at corvair.org" <virtualvairs at corvair.org>,
"air_cooled63 at yahoo.com" <air_cooled63 at yahoo.com>
Subject: Re: <VV> Installing a 66 4 speed transmission to a 65 Corvair
Message-ID: <1970280713.1924725.1608234220676 at mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8

The input shaft is different, and the front bracket has an offset for the 
longer transmission.?


-----Original Message-----
From: Harry Yarnell (Verizon) via VirtualVairs <virtualvairs at corvair.org>
To: 'Jerry Brown' <air_cooled63 at yahoo.com>; virtualvairs at corvair.org
Sent: Thu, Dec 17, 2020 1:38 pm
Subject: Re: <VV> Installing a 66 4 speed transmission to a 65 Corvair

Transmission or transaxle?
The '66 tranny mounts with six bolts; the '65, four bolts.
Not sure of the shafts; been awhile.



-----Original Message-----
From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf Of 
Jerry Brown via VirtualVairs
Sent: Thursday, December 17, 2020 12:19 PM
To: virtualvairs at corvair.org
Subject: <VV> Installing a 66 4 speed transmission to a 65 Corvair

Is there any special things to be done before installing a 66 4 speed 
transmission into a 65 4 speed Corvair.

Jerry Brown65 Corsa
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
_______________________________________________

_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
_______________________________________________


------------------------------

Subject: Digest Footer

_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, mail to: 
vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
VirtualVairs at corvair.org
http://www.vv.corvair.org/mailman/listinfo/virtualvairs
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives at http://www.vv.corvair.org/archive.htm


------------------------------

End of VirtualVairs Digest, Vol 191, Issue 16
********************************************* 

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________

More information about the VirtualVairs mailing list