<VV> Grease Boots for Corvair Ball Joints

[FrankDuVal]

C637 is sized for tie rod ends, not ball joints.

Frank DuVal

On 6/13/2020 5:01 PM, Matt via VirtualVairs wrote:
> https://i.ebayimg.com/images/g/xT0AAOSw-kBbddu6/s-l500.jpg
>
> https://www.ebay.com/itm/Energy-Suspension-9-13130G-Ball-Joint-Dust-Boot-Set/163868933332?epid=93791827&hash=item2627597cd4:g:xT0AAOSw-kBbddu6
>
> Matt Nall
> Sea Mountain
> SW  Oregon Coast
>
>
> Sent from Mail for Windows 666
>
> From: Joel McGregor via VirtualVairs
> Sent: Saturday, June 13, 2020 12:14 PM
> To: virtualvairs at corvair.org
> Subject: Re: <VV> Grease Boots for Corvair Ball Joints
>
> Clark's C637
>
> -----Original Message-----
> From: VirtualVairs On Behalf Of Bill H. via VirtualVairs
> Sent: Monday, June 08, 2020 3:22 PM
> To: virtualvairs at corvair.org
> Subject: <VV> Grease Boots for Corvair Ball Joints
>
> If anyone is "desperate" for grease boots for your Corvair ball joints, these might work in a pinch.
> Last post I sent it seems no one's making the correct original GM grease boots, but you can get these on Amazon.  I cut about a quarter of an jnch off the bottom, and they seem to hold grease.
> I'm sending a couple of pictures as an attachment, not sure if VV supports attachments to submissions.  If not I'll be happy to email you pics.
> They are Energy Suspensipn Ballpoint Boots, 9.13130G.
> Best Wishes to all...Bill Hershkowitz    66 Monza Sport sedan
>