<VV> Holley Sniper 2GC

[James Cuneo]

Thanks Paul,
I have a wastegate installed, alchohol inection, Safegard.
Im just looking to upgrade the cold starting and eliminate turn cut out issues.
Was hoping someone had experience with this setup.
Thank you,
Jim

________________________________
From: Paul Fox <paulvair at yahoo.com>
Sent: Saturday, June 20, 2020 7:01 AM
To: James Cuneo <jamescuneo at hotmail.com>
Subject: Re: <VV> Holley Sniper 2GC

My first guess would be much more than that. the stock carb is the limiting factor on the turbo set up. With the injection you just opened the restriction on the intake and it will make way to much boost. for a stock engine.
Paul Fox

On Friday, June 19, 2020, 03:53:35 PM EDT, James Cuneo via VirtualVairs <virtualvairs at corvair.org> wrote:


Looking at the Holley Sniper 2GC for my turbo 140. Has anyone used this in a draw through setup?
Would 450cfm give 10-12 psi boost at 5500pm?
Thanks in advance,
Jim C
Norcal
1965 corsa turbo 140
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org<mailto:vv-help at corvair.org>
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org<mailto:VirtualVairs at corvair.org>
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
_______________________________________________