<VV> WTB Improved 1966 style failsafe Late rear engine mount

James Davis hurricanehazel16 at gmail.com
Wed Oct 13 14:43:23 EDT 2021


>From UltraVan Tech Tips CD

TECH ARTICLE: 2004-02 SUBJECT: Engine Mount
UV MANUAL SECTION: 13-9 AUTHOR: Jim Davis (#388)

There is a new type of engine mount available for Corvairs and Corvair
powered UltraVans.  It is quite different from the 65 or 66-69 type of
mount.  It is made by Jeff Brekke.  He designed it to eliminate the late
model mount’s weaknesses.  The picture shows a failed 66 mount, a newly
rebuilt late mount (Clark’s) and a Jeff Brekke mount.  The cost is $130.
Contact him directly for more information.

Jeffrey Brekke, 2315 Circle Dr., Lakeland FL, 33803-3805 or <brek86 at cs.com>

On Wed, Oct 13, 2021 at 10:03 AM larry--- via VirtualVairs <
virtualvairs at corvair.org> wrote:

> Several years ago I purchased from someone at the Palm Springs Fan Belt
> Toss an improved 1966 style rear engine mount.   It was not from a known
> vendor but used a steel horizontal rod and a rubber or urethane bushing
> and was fail safe and well done.   Now I need another and would like to
> purchase one.
>
> I hope someone can link me up with who I can purchase an additional one
> from.
>
> Thanks for any help.
>
> Larry Forman
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> Archives: http://www.vv.corvair.org/archive.htm
>  _______________________________________________
>


More information about the VirtualVairs mailing list