<VV> VirtualVairs Digest, Vol 222, Issue 15
Jeremiah Grosvenor
fergurgemy at gmail.com
Tue Aug 1 07:30:36 EDT 2023
I was just going to post my carb guy’s info and then realized it is my carb
guy, Grant Young, that is looking for the part. 🤣Btw, if anyone on here
needs carbs for their Corvair Grant is your guy!
On Mon, Jul 31, 2023 at 8:48 PM Jim Simpson via VirtualVairs <
virtualvairs at corvair.org> wrote:
> Re/ Need a part reproduced
>
> I do have a 3D printer, but the plastics I use (mostly PLA) are relatively
> low melting point. Typically 130 C (266 F), but shouldn't be exposed to
> much over 100 C (212 F). This is pretty much the standard for home 3D
> printers.
>
> You need to find someone who can print nylon or ABS. There are some higher
> end, home, 3D printers that can do it.
>
> Do you have a design for the part?
>
> Jim Simpson
> Group Corvair
>
> On Mon, Jul 31, 2023 at 12:00 PM <virtualvairs-request at corvair.org> wrote:
>
> > Send VirtualVairs mailing list submissions to
> > virtualvairs at corvair.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://www.vv.corvair.org/mailman/listinfo/virtualvairs
> > or, via email, send a message with subject or body 'help' to
> > virtualvairs-request at corvair.org
> >
> > You can reach the person managing the list at
> > virtualvairs-owner at corvair.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of VirtualVairs digest..."
> >
> >
> > Please also edit to include only the topic you're responding to when
> > replying to a Digest.
> > This message was sent by the VirtualVairs mailing list, all copyrights
> are
> > the property
> > of the writer, please attribute properly.
> > For help, mail to: vv-help at corvair.org
> > Archives at http://www.vv.corvair.org/archive.htm
> > This list sponsored by the Corvair Society of America,
> > http://www.corvair.org/
> > Change your options:
> > http://www.vv.corvair.org/mailman/options/virtualvairs
> >
> >
> > Today's Topics:
> >
> > 1. Need a part reproduced (Grant)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Sun, 30 Jul 2023 14:37:40 +0000
> > From: Grant <gyoungwolf at earthlink.net>
> > To: virtualvairs at corvair.org
> > Subject: <VV> Need a part reproduced
> > Message-ID: <7e118b83-85ac-f544-117b-b26653d1ee0d at earthlink.net>
> > Content-Type: text/plain; charset=utf-8
> >
> > Checking to see if there is someone out there who has a 3-D printer and
> is
> > interested in reproducing a small plastic part for our HV carburetors? If
> > so, please drop me a private reply. Or, if someone has had good luck
> with a
> > supplier or such things, that would also be appreciated.
> > Thanks
> > Grant Young
> >
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > This message was sent by the VirtualVairs mailing list, all copyrights
> are
> > the property
> > of the writer, please attribute properly. For help, mail to:
> > vv-help at corvair.org
> > This list sponsored by the Corvair Society of America,
> > http://www.corvair.org/
> > VirtualVairs at corvair.org
> > http://www.vv.corvair.org/mailman/listinfo/virtualvairs
> > Change your options:
> > http://www.vv.corvair.org/mailman/options/virtualvairs
> > Archives at http://www.vv.corvair.org/archive.htm
> >
> >
> > ------------------------------
> >
> > End of VirtualVairs Digest, Vol 222, Issue 15
> > *********************************************
> >
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> Archives: http://www.vv.corvair.org/archive.htm
> _______________________________________________
>
More information about the VirtualVairs
mailing list