<VV> Nut Size on Late Model Koni Shocks - Front

[William Hershkowitz]

                                                                        B"H
Michael/Jim/Bryan:  Yes, and unfortunately the nuts and the plastic cap came loose on the passengers' side, and everything fell off.
I did buy a package of nuts of the correct side and have "jammed" two onto the top of the shock.  I think it's a good idea to add thread lock, next time I get the car out of the garage I'll hopefully put that on.
Interestingly on the drivers' side everything is intact.

Thanks guys for you advice!
Bill
    On Wednesday, February 22, 2023 at 04:34:34 PM EST, K. Michael Kost <vairmike at sbcglobal.net> wrote:  
 
 There should be 2 nuts in a jam nut configuration and a plastic cap that goes over both of them.
Mike Kost
Get Outlook for AndroidFrom: VirtualVairs <virtualvairs-bounces at corvair.org> on behalf of Jim Becker via VirtualVairs <virtualvairs at corvair.org>
Sent: Tuesday, February 21, 2023 5:04:11 PM
To: Bryan Blackwell <bryan at skiblack.com>; William Hershkowitz <gojoe283 at yahoo.com>
Cc: Virtual Vairs <virtualvairs at corvair.org>
Subject: Re: <VV> Nut Size on Late Model Koni Shocks - Front 
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________