<VV> There is always that one Corvair

[Seth Emerson]

 Frank -
I suggest the ferrule unions for this application. Positive seal, easy to remove if needed, forever install.


But not stock!
-Seth
    On Thursday, December 26, 2024 at 08:45:36 PM PST, Frank DuVal via VirtualVairs <virtualvairs at corvair.org> wrote:   

 What year carburetors?

#1. replace the balance tubes. Not just check, use some new 5/16" rubber 
fuel line to replace them. yes, 3/8" fits easier, but 5/16" really seals 
if you get it on!

Frank DuVal

On 12/26/2024 7:44 PM, Ed Lindsay via VirtualVairs wrote:
> Hello,I am asking all you seasoned Corvair Mechanics if you have ever had a Corvair that just won't idle.  You check everything and everything is good.  It will start; however, when you come to a stop it will not idle.  We have two Corvairs like this.  What do you check out when this happens to you?  Please number these suggestions so that I can make a good list in my newsletter.  Start with number 1 and think of as many things that you would check out as you can.  Example:  1.  Check if not out of gas.  2.  Check if out of oil.  3.  Check timing. 4.  Etc. Hope someone comes up with one that we might have overlooked. June BugWFCC Chronic Corvair
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________
  
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 1735275536902blob.jpg
Type: image/png
Size: 231142 bytes
Desc: not available
URL: <http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20241227/8d446b2f/attachment.png>