[FC] Looking for a bracket

[Kent Sullivan]

Hi again,

I found a picture of the bracket online at Clark's:

http://www.corvair.com/user-cgi/catalog.cgi?function=goto&catalog=SPECIALTY&
section=USED&page=USED-14 

It's #18 in the '63-'65 rear van clutch linkage section (page 14 of the Used
catalog, in case the link above doesn't work for you for some reason).
Clark's is currently out of stock on this item.

Maybe I was wrong about this part being used on '62s since Clark's says '63
and later...

Thanks!
-----Original Message-----
From: corvanatics-bounces at corvair.org
[mailto:corvanatics-bounces at corvair.org] On Behalf Of Kent Sullivan
Sent: Saturday, September 03, 2005 9:02 AM
To: 'The Corvanatics list'
Subject: [FC] Looking for a bracket

Hi,

On '62 and later FCs with manual transmission, there is a little bracket
that holds the front of the clutch return spring that is back by the
transmission. This bracket is held in place by the clevis pin that attaches
the rear end of the clutch cable to the rod coming from the transmission.
It's a little hard to describe in words. I can email a small picture to
anyone who thinks they can help--it's much more easily described in words.

Or, if you have a FC assembly manual for '62 and later, turn to UPC 6 or 7
(depending on the year) and locate the clutch linkage pages. The part I'm
talking about is #33 on the page I'm looking at. (I can also provide the
full GM number if you want.)

Apparently these brackets were often discarded when service work was
performed since the front of the spring can be hooked otherwise. I'd just
like to have the correct part.

Thanks!


_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America,
http://www.corvair.org/