[FC] Starter issues

[Shaun]

I'd have a close look at the ring gear, it's probably got a flat spot,
chipped teeth or a broken weld. I'm guessing the next step in the
progression might be a broken starter nose.

yea, Vairily ... Shaun

----- Original Message ----- 
From: "Charles" <r75 at shaw.ca>
To: <corvanatics at corvair.org>
Sent: Sunday, February 12, 2006 12:12 PM
Subject: [FC] Starter issues


> Hello all, I've got some problems with my starter. It seems like the
> solenoid is not pushing out enough to engage the ring gear. I worked
> perfectly until I had the clutch replaced (disc, pressure plate, and
> flywheel) and ever since I got it back it has had starting trouble. I
> haven't checked yet to see how well the charging system is working but
> might that be a possible problem? The starter isn't that old and, as I
> said, was working perfectly. Things just die, I know, but what I can't
> figure out is that strange thing where the starter won't engage but if
> you put the trans in gear and let the clutch out so it slightly bumps
> (you're on a mild grade let's say and not like trying to jump start, I
> mean like not even enough of a jolt to spill a cup of coffee)  you then
> depress the clutch  pedal and turn the ignition and like magic it
> engages. What on earth is that all about?
>
> thanks,
>
> Charles
>
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America,
http://www.corvair.org/