[FC] Front suspension /spindles

[BBRT]

Anyone know what spindles were used? I understood they were later, like 
61-62 full-size Chebbie. Yes? No?

Chuck S
----- Original Message ----- 
From: "Dale Dewald" <dkdewald at pasty.net>
>
> The FC front suspension and brakes used a lot of parts common to the full
> sized 59-60 Chevrolet and Corvette--some of these parts are probably also
> shared with the 1/2 ton truck.  The ball joints, suspension bushings, 
> A-arm
> shafts, brake cylinders and drums were all the same '61-'65.  The 
> boomerang
> arm and idler arm were unique to the FC. Don't throw any of these away
> because, with some engineering, they are rebuildable.  For some reason the
> '65 FC steering tie rods ends were different from the '61-'64.  I seem to
> remember also that the steering relay rod had different hole sizes to
> accept the different rod ends.
>
>
> Dale Dewald
> Hancock, MI
>