[FC] FC Steering Column and Turn Signal Mechanism Differences

[Mervyn Krull]

Hi all!
My brother in law took the existing signal mechanism apart by carefully 
pulling the metal tangs holding it all together and cleaning it. Works fine!
Worth a try...?
The automatic cancelling part didnt go so well, so I just shut it off 
manually.
toodles
Merv Krull
Salmon Arm, BC
----- Original Message ----- 
From: <kevin at kcvairbrush.com>
To: "corvanatics group" <corvanatics at corvair.org>
Sent: Saturday, September 11, 2010 9:31 AM
Subject: [FC] FC Steering Column and Turn Signal Mechanism Differences


> Folks,
> Are there any differences between the '61-'63 FC and '64-'65 FC
> steering column and turn signal mechanism? Are early car turn signal
> mechanism interchangeable with the '61-'65 FC's? Turn signal
> mechanism would be the working parts inside the steering hub under
> your horn. If early cars turn signal mechanism are easier to find and
> plentiful and would work only in the '65 FC, what would I need to
> watch out for when swapping into a '63 Corvan? Would an early car
> turn signal mechanism work in the '61-'63 FC steering hub?
> Kevin
>
>
> ------------------------------
> Kevin G. Clark
> kevin at kcvairbrush.com
> www.kcvairbrush.com
>
>
>
>
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/