[NoVa-Corvairs] Now I'm in a bind.

[Daniel Goldberg]

Literally.

My carb cross-shaft, accelator rod, and accelerator pivot are all replacement pieces I recently purchased.  When I hook all of them together, the entire mechanism binds up.  I unscrewed the bit on the accelerator rod that fits into the carb cross-shaft until it was at the very end of the rod, and this did nothing.

Is there a different accelerator rod for a '65 140?

> ----- Original Message -----
> From: "Daniel Goldberg" <goldie at danielgoldberg.net>
> To: "Northern Va Corvair Club" <novacc-list at corvair.org>
> Subject: Re: Fw: [NoVa-Corvairs] Needed: a 1965 140 carb cross shaft
> Date: Mon, 8 Oct 2007 10:18:32 -0400
> 
> 
> Funny you should ask: I'm sitting here in my garage clothes, about to commence 
> further attempts to get the Corvair back on the road.
> 
> The axle stuff was fairly easy to fix.  However, the accelerator portion is 
> proving to be a nightmare.  When I hook up the rod that fits between the pivot 
> and the crossover shaft (all three are replacement parts), the whole mechanism 
> seems to bind up.  Maybe the rod that goes from the front of the car to the 
> pivot got bent too.
> 
> Anyway, that's what I'm off now to ascertain.
> 
> 
> 
> > ----- Original Message -----
> > From: "Curtis Shimp" <clshimp at juno.com>
> > To: novacc-list at corvair.org
> > Subject: Re: Fw: [NoVa-Corvairs] Needed: a 1965 140 carb cross shaft
> > Date: Mon, 8 Oct 2007 08:01:44 -0400
> >
> >
> > Daniel:
> >
> > So - what is the status of your Corvair?
> >
> > Curt
> > _______________________________________________
> > Novacc-list mailing list
> > Novacc-list at corvair.org
> > http://www.vv.corvair.org/mailman/listinfo/novacc-list
> 
> >
> 
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list

>