[NoVa-Corvairs] My Corvair is here.

[ALBERT BIRKS]

Hi Frank:  Good information!  Do you  know the part number for the larger clips on the carbs?  Or is the 2L the larger clip?

Al Birks
  ----- Original Message ----- 
  From: Frank DuVal via Novacc-list<mailto:novacc-list at corvair.org> 
  To: novacc-list at corvair.org<mailto:novacc-list at corvair.org> 
  Sent: Tuesday, July 08, 2014 12:26 AM
  Subject: Re: [NoVa-Corvairs] My Corvair is here.


  The original choke clip is a 1L. This is a discontinued part from the clip manufacturers. I have tried all the sources I could Google. A 2L is the best you can do. Typically found in the "Help" (by Dorman) section of the auto parts store in a package of several different sizes. Or, ask anyone who rebuilds carbs, as that is the clip used on the accelerator pump linkage on a Rochester H, HV, so every kit I buy has a new one in it.

  See discussion here:

  http://corvaircenter.com/phorum/read.php?1,714845,714993#msg-714993<http://corvaircenter.com/phorum/read.php?1,714845,714993#msg-714993>

  400° sounds right on this hot day. I wouldn't worry yet.

  Brake lights and turn signals use same filaments in the rear. Also, both go through the turn signal switch. Start by shorting the terminals on the brake light switch, this should light both rear bright bulbs if the turn signal switch is in the middle position.

  Congratulations on getting the car done!

  Frank DuVal


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vv.corvair.org/pipermail/novacc-list/attachments/20140709/0e9945a8/attachment.html>