[NoVa-Corvairs] My Corvair is here.

[corvairduval at cox.net]

The clips on the accelerator linkage (crosshaft to carb belcranks) are
typically 4L. There might be a 4R in there on some.

If you look at the broadside of the clip, you may see the 2L, 1L, 4L, etc
stamped on the side of the clip.

Frank DuVal

Original email:
-----------------
From: ALBERT BIRKS foxchase123 at msn.com
Date: Wed, 9 Jul 2014 12:17:41 -0400
To: corvairduval at cox.net, novacc-list at corvair.org
Subject: Re: [NoVa-Corvairs] My Corvair is here.


Hi Frank:  Good information!  Do you  know the part number for the larger
clips on the carbs?  Or is the 2L the larger clip?

Al Birks
  ----- Original Message ----- 
  From: Frank DuVal via Novacc-list<mailto:novacc-list at corvair.org> 
  To: novacc-list at corvair.org<mailto:novacc-list at corvair.org> 
  Sent: Tuesday, July 08, 2014 12:26 AM
  Subject: Re: [NoVa-Corvairs] My Corvair is here.


  The original choke clip is a 1L. This is a discontinued part from the
clip manufacturers. I have tried all the sources I could Google. A 2L is
the best you can do. Typically found in the "Help" (by Dorman) section of
the auto parts store in a package of several different sizes. Or, ask
anyone who rebuilds carbs, as that is the clip used on the accelerator pump
linkage on a Rochester H, HV, so every kit I buy has a new one in it.

  See discussion here:

  http://corvaircenter.com/phorum/read.php?1,714845,714993#msg-714993<http:/
/corvaircenter.com/phorum/read.php?1,714845,714993#msg-714993>

  400° sounds right on this hot day. I wouldn't worry yet.

  Brake lights and turn signals use same filaments in the rear. Also, both
go through the turn signal switch. Start by shorting the terminals on the
brake light switch, this should light both rear bright bulbs if the turn
signal switch is in the middle position.

  Congratulations on getting the car done!

  Frank DuVal




--------------------------------------------------------------------
mail2web.com - Microsoft Exchange solutions from a leading provider -
http://link.mail2web.com/Business/Exchange