[V8Vairs] Throttle Assembly

[Paul Strohl]

jim, most of us v-8 guys out here on the left coast(calif) use a 10 ft boat throttle cable which works fine. paulstrohl at yahoo.com 66 corsa crown conversion with a 350 cu in 400 hp crate motor

Paul Siano <paulsiano at yahoo.com> wrote:  The Morse style works very well and gets my vote.

Paul

66 Corsa Crown Chevy aluminum 283 

Jim Acker wrote:
I'm close to getting my car on the road and am now working on the throttle
assembly. More specifically, I am working on the linkage from the stock
pedal assembly to the Edelbrock carb. The stock pedal is a pusher type and
the cable has a long way to go. Do most you guys run a high quality cable,
like a Morse style, in a pusher configuration from the pedal to the carb?
Or, do you shorten the stock accelerator rod in the tunnel and use the stock
bell-crank to create a pull style?

I'm just trying to get a read on whether a push configuration really works
well over such a long distance. I'm planning to run it under the motor and
back up behind to the cable bracket I have between the driver side valve
cover and the distributor, much like Rick Norris did on his white car. This
is nearly 10 ft of cable I'd be pushing!

Jim Acker
_______________________________________________
V8Vairs mailing list
V8Vairs at corvair.org
http://www.vv.corvair.org/mailman/listinfo/v8vairs
This list sponsored by the Corvair Society of America, http://www.corvair.org/



---------------------------------
Looking for last minute shopping deals? Find them fast with Yahoo! Search.
_______________________________________________
V8Vairs mailing list
V8Vairs at corvair.org
http://www.vv.corvair.org/mailman/listinfo/v8vairs
This list sponsored by the Corvair Society of America, http://www.corvair.org/


       
---------------------------------
Never miss a thing.   Make Yahoo your homepage.