<VV> Tach test

[Delta Inc]

----- Original Message ----- 
From: "Chris Hewitson" <cnhewy@dslextreme.com>
To: <VirtualVairs@corvair.org>

> Is there a method to test the tach operation directly at the the unit? >
The car is a Corsa 140
> Chris Hewitson
***********
14 feet of flexy hook up wire direct from the coil negative to the tach
connection under dash, for the signal.
... if that doesn't fire it up, ( engine running ) then jumper from a known
good ground and a known good  +12 volts , both tested with voltmeter, to
appropriate wires at the tach.
***********
Corvair dash grounds are notorious for going weird, keep this in mind.

Just a start, but easy to do ... ken campbell, iowuh.