<VV> 4bbl on an early

[Sadek Charles H DLVA]

Just make your runners bend more, to lower the carb.  I thought there was
enough room to clear throttle, fan belt pulley and still fit under hood.

Chuck S

-----Original Message-----
From: Coneheads2001@aol.com [mailto:Coneheads2001@aol.com] 
Sent: Tuesday, August 31, 2004 6:53 AM
To: virtualvairs@corvair.org
Subject: <VV> 4bbl on an early

 Grant,

 I had the same experience, bought a 140 with the center mount 4 BBL and put

it in  my '64 Cpe. Deck lid would not close, not even close. Carb was not a 
Holley but from a late 50's Dodge (according to the counter guy at a local
parts 
store), had a heck of a time getting a rebuild kit for it. But the carb did 
not seem unusually tall or larger than the Holleys, I figured it was just an
EM 
thing and the center mount just didn't work on earlies and I went to a stock

set-up.

                                                                  Andy Cone
                                                                  '64 Monza 
Cpe 140/4
                                                                  '64 Spyder

Cvt 150/4
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help@corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs@corvair.org
List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs 
_______________________________________________