<VV> 63 fuel pump

[UltraMonzaWest@aol.com]

Chris,   just make sure you understand the "Pinchbolt" system....

the point holds the housing in place by insertion into the "dimple"..nothing more....the nut is a LOCKNUT...to hold the pointed bolt in position...

So...with fingers....wiggle the pump housing up and down while tightenoing the P-bolt with fingers.....then 2 wrenches..one to hold the bolt head...one to tighten locknut...

A new pump will fill the bowls in just a few cranks..

Matt N.