<VV> Use springs in HV carbs
Sadek Charles H DLVA
SadekCH@NSWC.NAVY.MIL
Thu Feb 10 14:49:07 EST 2005
Springs were used in later carbs to assist the float in moving the float
bowl inlet needle valve. The strength of the spring and of course, the use
or non-use of a spring on the floats designed for the spring assist, affects
the float bowl fuel level. This impacts the operation of the carb.
Use the springs.
Chuck S
BBRT
-----Original Message-----
From: Louis C. Armer, Jr. [mailto:carmerjr@mindspring.com]
In this case, Ron referred to "a set of wire holders" and not the "normal
spring" you
see described and pictured as "spring-float control" item # 13 page 55 of
Clarks 2002-6 main catalog.
So Bob what about these wire holders Ron is referring to?
Chuck Armer
///////////////////////////////
At 10:29 PM 2/9/05 -0500, you wrote:
>In a message dated 2/9/05 9:58:39 PM Eastern Standard Time,
qcc65@charter.net
>writes:
>Is this another case of "unecessary or spare parts" syndrome? The springs
>should be used. If you have problems with the carbs it won't be because
>of the
>float springs.
>
>Bob
More information about the VirtualVairs
mailing list