<VV> Tires for a 63 Spyder
Eric S. Eberhard
flash@vicspdi.com
Wed, 05 Jan 2005 09:21:24 -0700
I would call California Corvair and see about the custom radials. Much better!
At 12:58 PM 1/4/2005, Alan and Clare Wesson wrote:
>Coker Tire (www.coker.com) have a 6.50 x 13 1 inch whitewall bias ply for
>$104 each. Personally, I would prefer radials, but if looks are what
>matter to you, you can get all 5 tyres done for a mere $520 + shipping +
>fitting (if anyone will do it for you) + balancing + alignment.
>
>Mind you, things could be worse. The only tyres which will a) look right;
>and b) provide the level of grip I want on my 1960 Lancia Panel Truck are
>Michelin Pilot X in 6.00 x 16 (they are radial versions of the original
>Michelin bias plies). I can get bias plies which will make it handle like
>a truck (and the whole point of Lancia trucks is that they don't!), or I
>can get radials whose sidewalls are way too low, which will make it look
>really silly and lower the gearing as well. But I can't get the right
>sidewall height and good handling except from the Michelin (unless someone
>know better!). I had some American-made radial whitewalls on the Kaiser,
>and they were 16 inch and they made it handle pretty well, but the
>sidewalls were WAY lower than I want.
>
>They will run me at $2600 for five, plus shipping, fitting, etc. In other
>words, exactly the same price for one tyre as you would pay for all five...
>
>Think I will have to find another alternative!
>
>Cheers
>
>Alan
>
>www.xtraspecialsevens.co.uk
>Lotus 7 S2 and S3 spares and restoration specialists
>----- Original Message ----- From: <CorvairEd@aol.com>
>To: <bmooers@farniente.com>; <VirtualVairs@corvair.org>
>Sent: Tuesday, January 04, 2005 7:14 PM
>Subject: Re: <VV> Tires for a 63 Spyder
>
>
>>bmooers@farniente.com writes:
>>
>>I am looking for replacement tires for my 63 Spyder. I would like to have
>>a radial with a 1" whitewall. What size tire will look best - and close to
>>stock for this car? Does anyone recommend a certain brand that has a good
>>look and value? Thanks - Bruce
>>
>>
>>
>>
>>Bruce,
>>Good luck finding a 1" whitewall on a 13" tire. About a year ago I searched
>>all of the local tire shops and the web and the best I could find was 1/2"
>>whitewalls. You can order them custom made but the cost is prohibitive. A
>>word of advise, if you do find them, buy five.
>>
>>Ed Corson (CORSA Member)
>>IECC
>>_______________________________________________
>>This message was sent by the VirtualVairs mailing list, all copyrights
>>are the property
>>of the writer, please attribute properly. For help,
>>mailto:vv-help@corvair.org
>>This list sponsored by the Corvair Society of America,
>>http://www.corvair.org/
>>Post messages to: VirtualVairs@corvair.org
>>List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
>>_______________________________________________
>_______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are
>the property
>of the writer, please attribute properly. For help, mailto:vv-help@corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs@corvair.org
>List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
>_______________________________________________
Eric S. Eberhard
(928) 567-3727 Voice
(928) 567-6122 Fax
(800) 569-1122 Denver Office (I am never there, you can leave a
message)
928-301-7537 -- you may call any time day or night, I turn it off when I
sleep :-) Please try to use a land line first (reception often poor).
http://www.vicspdi.com
Completely updated web site of personal pictures with many new
pictures! Includes horses, dogs, Corvairs, and more.
http://www.vicspdi.com/ourpics/index.html
NEW Corvair pictures including the Judson setup on our 62 Sedan and lots of
pictures of Cheryl's 62 Monza Wagon (with Kelsey-Hayes wire wheels).
http://www.vicspdi.com/ourpics/corvairs.html