<VV> RE: budget paint stripping

[AKG]

Been there done that.  Stripped a whole car with the use of a couple of
razor blades - didn't need holders, paint came off in sheets for the most
part.  Simply amazing what lousy prep work will do to a paint job..

The Artful Dodger

> From: "mopar at jbcs2.net" <mopar at jbcs2.net>
> Reply-To: mopar at jbcs2.net
> Date: Fri, 1 Jul 2005 15:03:18 -0400
> To: virtualvairs at corvair.org
> Subject: <VV> RE: budget paint stripping
> 
> 
> I never would have beleived it until I helped a friend do it.
> Box of 100 cheap razor scraper blades, and a couple of the "good" holders
> and we stripped a 67 chevelle. paint was thick on that car and it came off
> so easily it was ridiculous.
> Certain areas needed stripper, but for the most part the 2 of us stripped
> the car with razor blades.
> Now this does not always work, we tried it again on a different car, and it
> would not do it. But if you have nothing to lose...........give it a try.
> 
> Gary Swiatowy
> 
> 
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .
> 
> 
> 
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the
> property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________