How? Re: <VV> Coil Question

[Duane, Jim (US SSA)]

Or... Dwell meter.  Feeler gauge to get you in the ballpark with the cap
off...  BTW, I believe only the General's V8s had windoze, no?

Jim Duane
Still owner of the mega Sears Craftsman Engine analyzer (when it had a
needle on a big meter)!

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of
TimogensTurbo at aol.com
Sent: Tuesday, August 29, 2006 3:51 PM
To: virtualvairs at corvair.org
Subject: Re: How? Re: <VV> Coil Question

In a message dated 8/29/2006 11:38:20 AM Pacific Daylight Time, FrankCB 
writes:

> How do you get the feeler gauge inside the distributor to "adjust the 
> points" while running the engine?
=====================================================

60's GM's ..before HEI.....v8's....had WINDOZE  in the caps......lift
the 
window....insert allen wrench....turn CW  untill engine sputters..back
off 1/2 
turn....DONE!   It's in EVERY book!!!!  ggg

Matt Nall
stocker, mod, v8, turbo, boat, Sandcar
ALLVAIR!
Timogen was a softy!
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights
are the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options:
http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________