<VV> Jet size question and exhausting ideas
tibbitts at qx.net
Thu Jul 13 15:50:05 EDT 2006
Matt Nall is making the crossover pipes. Here's the link.
Sorry, can't help with the jets.
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Keith Onchuck
Sent: Thursday, July 13, 2006 3:38 PM
To: virtualvairs at corvair.org
Subject: <VV> Jet size question and exhausting ideas
OK the time has come for me to go back to 'stock'...
well mostly stock. I have a 110 that has the Clarks
4x1 kit on it. These are the small valve heads. I am
going to go back to a 2 carb setup. I am blocking off
the two secondary carbs for now. This winter I will
probably put on the stock 110 heads with the single
carb per side. I have 53 idle jets in the primaries.
This was in conjunction with headers and free flowing
dual exhaust. I have 47, 50 and 52 idle jets in my
possession. The car is a 110 4-speed 3.55 gears (I
think). Should I start with 47 or 50? (I knew I
should have made a note as to what was installed) All
4 carbs were from a 62 102HP motor. I kept the
original heads and carbs intact for this day. The
jets will be going into the 102 carbs for now.
Now the exhausting question, some time ago I remember
reading about a crossover pipe for the single exhaust
that was larger than stock and allowed a 2.5" or 2.25"
muffler to be used. Does anyone know who was doing
that? My hope is to get the larger crossover pipe and
use one of the mufflers that I have on the headers.
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
This message was sent by the VirtualVairs mailing list, all copyrights are
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
More information about the VirtualVairs