<VV> Radio Antenna

[Shaun]

On a stock antenna, at least '64, there's a sheet metal screw at the bottom
accessed from inside the right kick panel vent.

yea, Vairily ... Shaun

----- Original Message ----- 
From: <mhicks130 at cox.net>
To: <virtualvairs at corvair.org>
Sent: Saturday, July 15, 2006 8:59 PM
Subject: Re: <VV> Radio Antenna


> You can access it by removing the passenger vent panel as previously
mentioned but I changed my antenna without doing that.  I just removed the
antenna up and out thru the hole in the fender and held on to the antenna
wire while I installed the new one.
>
>
> <snip>
> OK....I'm buffaloed. How does one get to the right front fender mount
radio
> antenna?? Gotta replacement for the busted one but wherever I look, I
can't
> access the underside of the assembly. No access thru the trunk or under
the
> dash. I have the GM assembly manual but it's not clear as to how to get to
the
> antenna base. TIA,
>
>   Scott
> >------------------------------ 
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
the property
> of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________